ECOCOMFORT 2.0 SMART is a smart ventilating unit for an innovative approach in the environmental comfort management.
Thanks to the continuous parameter monitoring (such as VOC and humidity) and the “Artificial Intelligence” data processing, this system crosses all the useful information to optimize the ventilation system application, anticipating or delaying its activation according to the user behaviours in the ambient and the advanced geolocation, with the aim to provide the best hygrometric well-being and air quality conditions with the lowest possible consumption.
Thanks to this new advanced ventilation approach, the AUTO SMART SENSOR reduces the primary energy requirement through the Intelliclima+ App infographic sections, which displays the system consumption trend and the parameters read by the sensors on board: room temperature, ambient humidity and air quality.
FREE-COOLING mode is also available and can be activated automatically during the summer period, when the external temperature is lower than those internal. This function ensure a greater comfort, as well.
Moreover the ECOCOMFORT 2.0 SMART multi-connectivity system is connected to the Intelliclima+ App as an integrated smart home concept to remotely control the ventilation, heating and cooling systems.
- Tube: 160 mm
- Air exchange volume: 8.0 – 20.5 – 35 – 48.5 m3/st
- MAX ambient dimensions: līdz 36 m2 *
- MAX absorbed power: 2.0 – 2.5 – 4.0 – 6.3 W
- dB(A)[3m]: 0 – 12.5 – 20.5 – 26.5
- Color: White
EcoComfort 2.0 SMART INSTALLATION MANUAL
EcoComfort 2.0 SMART TECHNICAL DATA SHEET
The ECOCOMFORT-RF system is composed by one or more single-room high efficieny heat recovery units suitable for exterior walls installation. Thanks to the ceramic heat exchanger inside the unit, the heat of the extracted air is accumulated in the heat exchanger and released to the air flow in the intake cycle.The unit is equipped with a G3 filter.
Each ventilating unit is equipped with a DC brushless motor with low power cosumption controlled by a microprocessor which automatically sets the speed according to the temperature, humidity and light brightness readings of the sensors on board to ensure the best comfort.
Installation options: 1 “Master” unit with its remote control and up to 64 slave / additional units.
The remote control, thanks to its intuitive graphics, allows the user to set and modify the desired operating mode and to verify the setting status.
- Tube: 160 mm
- Air exchange volume: 15 – 28 – 48 – 68 m3/h
- MAX ambient dimensions: līdz 50 m2 *
- MAX absorbed power: 0 – 2.0 – 3.8 – 6.6 W
- dB(A): 0 – 27 – 32 – 38
- Color: White
EcoComfort RF TECHNICAL DATA SHEET
Single room heat recovery unit, SLAVE unit.
The ECOCOMFORT-RF system is composed by one or more single-room high efficieny heat recovery units suitable for exterior walls installation. Thanks to the ceramic heat exchanger inside the unit, the heat of the extracted air is accumulated in the heat exchanger and released to the air flow in the intake cycle.The unit is equipped with a G3 filter.
Each ventilating unit is equipped with a DC brushless motor with low power cosumption controlled by a microprocessor which automatically sets the speed according to the temperature, humidity and light brightness readings of the sensors on board to ensure the best comfort.
Installation options: 1 “Master” unit with its remote control and up to 64 slave / additional units.
The remote control, thanks to its intuitive graphics, allows the user to set and modify the desired operating mode and to verify the setting status.
- Tube: 160 mm
- Air exchange volume: 15 – 28 – 48 – 68 m3/h
- MAX ambient dimensions: līdz 50 m2 *
- MAX absorbed power: 0 – 2.0 – 3.8 – 6.6 W
- dB(A): 0 – 27 – 32 – 38
- Color: White
EcoComfort RF TECHNICAL DATA SHEET
Single room heat recovery unit with RF wireless control.
The ECOCOMFORT-RF system is composed by one or more single-room high efficieny heat recovery units suitable for exterior walls installation. Thanks to the ceramic heat exchanger inside the unit, the heat of the extracted air is accumulated in the heat exchanger and released to the air flow in the intake cycle.The unit is equipped with a G3 filter.
Each ventilating unit is equipped with a DC brushless motor with low power cosumption controlled by a microprocessor which automatically sets the speed according to the temperature, humidity and light brightness readings of the sensors on board to ensure the best comfort.
Installation options: 1 “Master” unit with its remote control and up to 64 slave / additional units.
The remote control, thanks to its intuitive graphics, allows the user to set and modify the desired operating mode and to verify the setting status.
- Tube: 100 mm
- Air exchange volume: 4 – 8 – 18 – 34 m3/h
- MAX ambient dimensions: up to 22 m2 *
- MAX absorbed power: 0 – 2.0 – 3.8 – 6.6 W
- dB(A): 0 – 18 – 23 – 28
- Color: White
EcoComfort RF TECHNICAL DATA SHEET
Single room heat recovery unit, secondary unit (no control).
The ECOCOMFORT-RF system is composed by one or more single-room high efficieny heat recovery units suitable for exterior walls installation. Thanks to the ceramic heat exchanger inside the unit, the heat of the extracted air is accumulated in the heat exchanger and released to the air flow in the intake cycle.The unit is equipped with a G3 filter.
Each ventilating unit is equipped with a DC brushless motor with low power cosumption controlled by a microprocessor which automatically sets the speed according to the temperature, humidity and light brightness readings of the sensors on board to ensure the best comfort.
Installation options: 1 “Master” unit with its remote control and up to 64 slave / additional units.
The remote control, thanks to its intuitive graphics, allows the user to set and modify the desired operating mode and to verify the setting status.
- Tube: 100 mm
- Air exchange volume: 4 – 8 – 18 – 34 m3/h
- MAX ambient dimensions: up to 22 m2 *
- MAX absorbed power: 0 – 2.0 – 3.8 – 6.6 W
- dB(A): 0 – 18 – 23 – 28
- Color: White
EcoComfort RF TECHNICAL DATA SHEET
The first heat recovery unit that sanitizes and changes the air, with RF control.
RHINOCOMFORT through a natural phenomenon called PHOTOCATALYSIS, disrupts toxic substances and pollutants at the molecular level. A LED light that illuminates the conduit through which the air and the water vapor contained in it passes through, RHINOCOMFORT decomposes the harmful substances present in the introduced air, transforming them into harmless substances.
RHINOCONFORT introduces sanitized air, guaranteeing a purified environment inside the home, in the office or any place that needs a healthy microclimate.
Prevent mold moisture.
- Tube: 160 mm
- Air exchange volume: 15 – 28 – 48 – 68 m3/st
- MAX ambient dimensions: līdz 50 m2 *
- MAX absorbed power: 0 – 2.0 – 3.8 – 6.6 W
- dB(A): 0 – 27 – 32 – 38
- Color: White
Rhinocomfort RF TECHNICAL DATA SHEET
Single room heat recovery unit with air sanitation, secondary unit / SLAVE (no control)
The first heat recovery unit that sanitizes and changes the air
RHINOCOMFORT through a natural phenomenon called PHOTOCATALYSIS, disrupts toxic substances and pollutants at the molecular
level. A LED light that illuminates the conduit through which the air and the water vapor contained in it passes through, RHINOCOMFORT
decomposes the harmful substances present in the introduced air, transforming them into harmless substances
RHINOCONFORT introduces sanitized air, guaranteeing a purified environment inside the home, in the office or any place that needs a
healthy microclimate
Prevent mold moisture
- Tube: 160 mm
- Air exchange volume: 15 – 28 – 48 – 68 m3/st
- MAX ambient dimensions: līdz 50 m2 *
- MAX absorbed power: 0 – 2.0 – 3.8 – 6.6 W
- dB(A): 0 – 27 – 32 – 38
- Color: White
Rhinocomfort RF TECHNICAL DATA SHEET
Single room heat recovery unit and wall mounting control.
Thanks to the ceramic heat exchanger the heat of the supply / extracted air flowing through it is accumulated and transferred to the air when the flow is reversed.
The ventilating unit is equipped with a DC brushless motor that thanks to its reverse function guarantees the correct air change of the room.
Aspirvelo air Ecocomfort is equipped with a G3 filter, easy to access and replace.
Aspirvelo air Ecocomfort can be controlled with a wall mounting control unit included in the packaging that allows the user to choose between automatic, extraction only or supply only. The control unit allows to adapt the fan speed according to the temperature difference between the indoor and the outdoor temperature readings.
The control unit is suitable to regulate for up to 4 units simultaneously.
- Tube: 160 mm
- Air exchange volume: 38 – 60 m3/h
- MAX ambient dimensions: up to 44 m2 *
- MAX absorbed power: 2.0 – 4.0 W
- dB(A): 28 – 34 db
- Color: White
Single room heat recovery unit, secondary unit / SLAVE (no control)
Thanks to the ceramic heat exchanger the heat of the supply / extracted air flowing through it is accumulated and transferred to the air when the flow is reversed.
The ventilating unit is equipped with a DC brushless motor that thanks to its reverse function guarantees the correct air change of the room.
Aspirvelo air Ecocomfort is equipped with a G3 filter, easy to access and replace.
Aspirvelo air Ecocomfort can be controlled with a wall mounting control unit included in the packaging that allows the user to choose between automatic, extraction only or supply only. The control unit allows to adapt the fan speed according to the temperature difference between the indoor and the outdoor temperature readings.
The control unit is suitable to regulate for up to 4 units simultaneously.
- Tube: 160 mm
- Air exchange volume: 38 – 60 m3/h
- MAX ambient dimensions: up to 44 m2 *
- MAX absorbed power: 2.0 – 4.0 W
- dB(A): 28 – 34 db
- Color: White
Single room heat recovery unit with wall mounting control.
Thanks to the ceramic heat exchanger the heat of the supply / extracted air flowing through it is accumulated and transferred to the air when the flow is reversed.
The ventilating unit is equipped with a DC brushless motor that thanks to its reverse function guarantees the correct air change of the room.
Aspirvelo air Ecocomfort is equipped with a G3 filter, easy to access and replace.
Aspirvelo air Ecocomfort can be controlled with a wall mounting control unit included in the packaging that allows the user to choose between automatic, extraction only or supply only. The control unit allows to adapt the fan speed according to the temperature difference between the indoor and the outdoor temperature readings.
The control unit is suitable to regulate for up to 4 units simultaneously.
- Tube: 100 mm
- Air exchange volume: 12 – 25 m3/st
- MAX ambient dimensions: līdz 20 m2 *
- MAX absorbed power: 1.5 – 2.0 W
- dB(A): 21 – 24 db
- Color: White
Single room heat recovery unit, secondary unit / SLAVE (no control)
Thanks to the ceramic heat exchanger the heat of the supply / extracted air flowing through it is accumulated and transferred to the air when the flow is reversed.
The ventilating unit is equipped with a DC brushless motor that thanks to its reverse function guarantees the correct air change of the room.
Aspirvelo air Ecocomfort is equipped with a G3 filter, easy to access and replace.
Aspirvelo air Ecocomfort can be controlled with a wall mounting control unit included in the packaging that allows the user to choose between automatic, extraction only or supply only. The control unit allows to adapt the fan speed according to the temperature difference between the indoor and the outdoor temperature readings.
The control unit is suitable to regulate for up to 4 units simultaneously.
- Tube: 100 mm
- Air exchange volume: 12 – 25 m3/st
- MAX ambient dimensions: līdz 20 m2 *
- MAX absorbed power: 1.5 – 2.0 W
- dB(A): 21 – 24 db
- Color: White
Dual flow ventilation unit with high-efficiency heat recovery
- Air exchange volume: 300 m3/h
- Air exchange volume at 100 Pa: 298 m3/h
- Efficiency: >90%
- SPI: 0,476 W/m3/h
- dB(A)[3m]: 41
ASPIRCOMFORT 300 HV TECHNICAL DATA SHEET
Dual flow ventilation unit with high-efficiency heat recovery
- Air exchange volume: 500 m3/h
- Air exchange volume at 100 Pa: 475 m3/h
- Efficiency: >90%
- SPI: 0.343 W/m3/h
- dB(A)[3m]: 44.4
ASPIRCOMFORT 550 V TECHNICAL DATA SHEET
High-efficiency heat recovery unit with RF control
- Air exchange volume: 210 m3/h
- Air exchange volume at 100 Pa: 173 m3/h
- Efficiency: >90%
- dB(A)[3m]: 52
ASPIRLIGHT BP TECHNICAL DATA SHEET
High-efficiency heat recovery unit with RF control
- Air exchange volume: 390 m3/h
- Air exchange volume at 100 Pa: 357 m3/h
- Efficiency: >90%
- dB(A): 62
ASPIRCOMFORT TECHNICAL DATA SHEET
Dual flow ventilation unit with high-efficiency heat recovery
- Air exchange volume: 140 m3/h
- Air exchange volume at 100 Pa: 140 m3/h
- Efficiency: >90%
- SPI: 0,448 W/m3/h
- dB(A)[3m]: 34.7
ASPIRLIGHT 140 TECHNICAL DATA SHEET
Dual flow ventilation unit with high-efficiency heat recovery
- Air exchange volume: 200 m3/h
- Air exchange volume at 100 Pa: 200 m3/h
- Efficiency: >90%
- SPI: 0,468 W/m3/h
- dB(A)[3m]: 36
ASPIRLIGHT 140 TECHNICAL DATA SHEET
Dual flow ventilation unit with high-efficiency heat recovery
- Air exchange volume: 350 m3/h
- Air exchange volume at 100 Pa: 350 m3/h
- Efficiency: >90%
- SPI: 0.379 W/m3/h
- dB(A)[3m]: 42.6
ASPIRCOMFORT 350 H TECHNICAL DATA SHEET
Ventilācijas iekārta ar augstas efektivitātes siltuma atgūšanu
| MODEL | m³/h max. | Pa max. |
Nominal flow rate Qnom |
W | dB at 2mt |
| UVR 500 MF HE | 650 | 470 | 620 | 2×160 | 46 |
| UVR 700 MF HE | 750 | 470 | 720 | 2×140 | 46 |
| UVR 1200 MF HE | 1200 | 600 | 1120 | 2×240 | 46 |
| UVR 1600 MF HE | 1600 | 750 | 1580 | 2×360 | 53 |
| UVR 2300 MF HE | 2300 | 500 | 1780 | 2×1070 | 55 |
| UVR 2800 MF HE | 2800 | 650 | 2160 | 2×1070 | 56 |
| UVR 3200 MF HE | 3200 | 650 | 2540 | 2×1040 | 56 |
| UVR 3800 MF HE | 3800 | 800 | 2760 | 2×1040 | 56 |
| UVR 4500 MF HE | 4500 | 650 | 2680 | 2×2200 | 57 |
| UVR 5400 MF HE | 5400 | 830 | 4780 | 2×2200 | 59 |
| UVR 6500 MF HE | 6500 | 1200 | 4880 | 2×2310 | 61 |
| UVR 7100 MF HE | 7100 | 1100 | 5140 | 2×2370 | 62 |
| UVR 8500 MF HE | 8500 | 830 | 6460 | 2×2380 | 63 |
UVR-HE sērijas TECHNICAL DATA SHEET
Wireless touchscreen programmable thermostat with weekly program and WIFI connection for remote control
Supervisor for Intellicomfort+ wireless multi-zone system
To control the heating, cooling and humidity system
WiFi connection for remote control through APP Intelliclima+ for Smartphone and Tablet.
General features
- Temperature regulation scale 2 ÷ 40 °C, increment 0.1°C.
- Measurement scale/room T display 30 ÷ 70%, increment 1%.
- Measurement scale/room T display – 50 ÷ + 50 °C.
- Relative humidity adjustment range 0÷100%.
- Differential 0.3 ÷ 5 K.
- Thermal gradient 4 K/h.
- Maximum room temperature 45°C.
- WiFi connection 2,4 GHz.
- Radio frequency 868Mhz.
- Maximum radio frequency power transmitted < 10mW.
- Managements general heating, cooling and humidity control.
- Managements zone heating, cooling and humidity control.
- Managements maximum 8 control zone.
- Managements maximum management of 15 devices directly connected to the CH180RFWIFI.
- Managements maximum management of 114 devices directly connected to network.
- Managements alarm management to exceed minimum and maximum temperature.
- Managements system lock management to overcome the minimum and maximum temperature threshold.
- Managements cooling management by activating the dehumidifier through dew point control or via a predetermined UR% threshold.
- Managements remote change over (only with APP).
- Managements auxiliary ON / OFF control for electric users (only with CH175).
- Viewing of energy consumption and system fault anomalies.
- Correction of the offset of the temperature read.
- Possibility to associate the names to all the zones.
- Storage temperature -10°C ÷ +60°C.
- Protection degree IP40.
- Display: Italian, English, French, Spanish, German, Russian.
- Screen lock of CH180RFWIFI and the connected CH120RFs with password and for display cleaning.
Download the Intelliclima+ APP
- Power supply 230V-50Hz
- Maximum absorbed power 5 W
- Contacts rating 5(3)A 250 Vca
- Type of action 1 B.U. (connection micro-switch)
- Output type 1 relay for heating/cooling or humidity systems (3 screw clamps (closed + open)
- Software A class
- Electric insulation: double insulation
- Pulse voltage 4000V
CH180RFWIFI TECHNICAL DATA SHEET
Electronic room thermostat with white positive backlight LCD touchscreen. It can manage heating, air conditioning and humidity systems. CH120RF can operate alone (single room) as a room thermostat or can be part of the wireless multizone Intellicomfort+ system.
General features
- CH120RF room thermostat shows the current settings, temperature and humidity levels and regulates the temperature in the zone in which it is installed, by communicating with the O60RF and CH175 actuators in the zone.
- Zone heating, cooling and humidity control;
- 3 settable temperatures: COMFORT, ECONOMY and OFF
- Lock function with password;
- Standard time management;
- White positive backlight LCD;
- It can control up to 15 wireless actuators, O60RF or CH175;
- Power supply: 2 batteries AA 1,5V;
- Contacts rating 5(3)A / 250Vac
- Free voltage contacts
- Connection to boiler heating/air-conditioning systems or dehumidifier: 3 screw terminals (contact switching NC and NO);
- Type of action: 1BU (micro disconnection);
- Software: A class
- Auxiliary input for floor probe;
- Electrical insulation: double insulation
- Pulse voltage: 4000V;
- Transceiver frequency: 868MHz
- Maximum radio frequency power transmitted < 10mW
O60RF opens/closes the radiator water flow valve, in order to maintain the environmental temperature as set on the CH180RF programmable or CH120RF room thermostats.
General features
- Power supply: 2 AA batteries 1.5V;
- Battery life: approx. 2 years based on a standard use;
- Transceiver frequency: 868MHz;
- Max. radiofrequency transmitted power: < 10mW;
- Protection degree: IP 30;
- Operating temperature: 0 ÷ 50°C;
- Storage temperature: -20 ÷ +70°C;
- Shell: white ABS;
- Compact case;
- Shell size: 48x63x74mm;
- Internal temperature sensor.
Electric features
- Power supply: 2 AA batteries 1.5V;